COUPLINGS
PIX Power Ware Couplings
-
-
-
-
PIX PHRC Coupling
Features
- Permits easy installation & removal utilizing Taper Bush option
- Reliable design due to interacting wedges pattern
- Capable to sustain incidental misalignment
- Exceptional performance at lower costs
- Suitable for flywheel applications
- Peak loads are reduced by a flexible component, as a prime design consideration
- Available in both Pilot Bore & Taper Lock design
Product Range
- Available sizes: PHRC-070, PHRC-090, PHRC-110, PHRC-130,PHRC-150, PHRC-18, PHRC-230, PHRC-280
PIX Pin Bush Coupling
Features
- Simple in construction
- Power transmission through high tensile bolts
- Highly stiff rubber Bushes are capable to bear the shock load
- Rubber bushes remain unaffected from water, oil or dust & suit to temperature up to 80ºC
- Suitable for high-speed drives
- On periodic maintenance, only Bushes have to be replaced as spares
Product Range
- Available sizes: PBC-1, PBC-2, PBC-2A, PBC-3, PBC-4, PBC-4A, PBC-5, PBC-6, PBC-6A, PBC-6B, PBC-7, PBC-7A, PBC-8, PBC-8A, PBC-8B, PBC-9, PBC-9A, PBC-10, PBC-10A, PBC-11
PIX Tyre Couplings
Features
- Higher torque capacity
- High misalignment bearing capacity i.e axial, parallel & angular
- Dampens vibrations & torsional oscillations in drive
- No lubrication required as there is no relative motion between coupling parts
- Easy tyre replacement without dismantling driver or driven position
- Available with taper bush facility in “F” & “H” type flanges
- Easy installation requiring no special tools or skilled labour
- Suitable to operate in robust environmental conditions
Product Range
- Available sizes: PTC-40, PTC-45, PTC-50, PTC-60, PTC-70, PTC-80, PTC-85, PTC-90, PTC-100, PTC-110, PTC-120, PTC-140, PTC-160, PTC-180, PTC-200, PTC-220, PTC-250
PIX Gear Coupling
Features
- Sustain very high torque rating
- Suitable for high-speed applications
- Heavy-duty design with flexibility
- Counters all types misalignment i.e. axial, parallel & angular & large axial movement capacity
- Suitable for high-temperature environment up to 120ºC
- Specially designed crowned teeth reduces backlash & radial clearance
- Gear Hubs are machined for proper meshing of Gears as well as for Inter-changeability
- Available in full flexible & half flexible design as per suitability & requirement
Product Range
- Available sizes: PGC-1, PGC-2, PGC-3, PGC-4, PGC-5, PGC-6, PGC-07, PGC-08, PGC-09, PGC-10, PGC-11, PGC-12
